Products

High capacity standard
Our most popular kiln for larger pallet companies.

It will accommodate a full truck load of custom size pallet in most cases and why it is very popular with those making new and custom size pallets. Plus it is very well suited to also dry pallets for mold preventions.
High capacity wide
A wider version of the High Capacity Standard model with increased air circulation.

It loads almost 1.5 truck load of GMA pallets and it is very popular with high volume recyclers and new GMA size pallets. This is very well suited to also dry pallets for mold preventions.
Economy
This is the most popular kiln among recycling pallet companies that have to heat treat medium to large volumes and are located in colder climates.

This kiln has the same dimensions as the Junior Long kiln, but comes with more air circulation and heat capacity.
Junior long
The largest version of the Junior pallet kiln series and is the most popular kiln among recycling pallet companies in warmer climates.

It is the least expensive kiln that can hold a full truck load of GMA pallets.
Junior mid size
Mid-version of the Junior pallet kiln series are normally used when there are space restrictions.

This unit can load 420 GMA pallets.
Junior Short
The smallest version of the Junior pallet kiln series are used for lower volume heat treatment needs, but with the same performance of the large High Capacity models.
Junior side load
The smallest version of the Side Loaded Pallet Kiln comes standard with heat recovery on the venting. It is used for treating small volumes of large skids and crates as well as for heat treating lumber and dunnage. It can also be upgrade with hot water or steam heating coils.
High capacity side load
Extra wide & extra deep. This version of the Side Loaded Pallet Kiln (delivered completely assembled) comes standard with heat recovery on the venting and can be upgraded with hot water or steam heating coils. It is used for treating greater volumes of large skids and crates as well as for heat treating lumber.
High efficiency side load
This modular heat treatment kiln has the most air flow and heating capacity for fastest heat treat cycles. The kiln comes standard with heat recovery on the venting and can be upgraded with hot water or steam heating coils.
Piggy-back solution
An Inexpensive alternative to setup a heat treatment system for pallets. It is installed on an insulated container or van-body verses free standing. The portable fan header insures proper air circulation throughout the chamber. This system is not designed to heat treat lumber or dry pallets.
MiniQuick
Our most popular firewood kiln-using the latest technology to reduce drying time and meeting 160F sterilizing temperatures. It can be heated with gas or wood waste and can dry firewood at 260F chamber temperatures. This is the most efficient model.
SmallQuick
A double version of our most popular firewood kiln using the latest technology to reduce drying time and meeting the 160F sterilizing temperatures. It can be heated with gas and can dry firewood at 260F chamber temperatures.
Export MiniQuick
Export firewood kiln is shipped on an ocean going container. Kiln utilizes the latest technology to reduce drying time and can meet 160F/70C sterilizing temperatures. It has gas or wood waste heating capabilities & can dry firewood at 260F/125C chamber temperatures. It comes in 5 major modules and is operational in 5 days.
Junior side load
A modified lumber kiln Side Loaded design and can be heated with gas or wood waste (through hot water or steam) at temperatures up to 200F / 95C. N.B. exclusively hot water heating rarely gets above 160F / 70C chamber temperatures.
Junior end load
A modified lumber/pallet End Loaded Kiln design and can be heated with gas or wood waste (through hot water or steam) at temperatures up to 200F / 95C. N.B. exclusively hot water heating rarely gets above 160F / 70C chamber temperatures.
High capacity end load
A modified lumber/pallet kiln End Loaded design and can be heated with gas or wood waste (through hot water or steam) at temperatures up to 200F / 95C. N.B. exclusively hot water heating rarely gets above 160F / 70C chamber temperatures.
Firewood baskets
Heavy duty Firewood baskets specifically designed for used in our kiln. Standard size is 100 cubic feet capacity, but custom sizes are available. These baskets be purchased from Kiln-direct or you can build your own using our plans.
Small standard
The smallest of the turn-key delivered lumber kilns with a realistic loading capacity of 9000 bf of 4/4 lumber.
Small deep
The deep version of the standard turn-key delivered lumber kilns.
Small wide
Widest version of the standard turn-key delivered lumber kilns with a realistic loading capacity of 14000 bf with 4/4 lumber. This model has been especially popular for higher temperatures and faster drying of softwoods.
Small deep-wide
Deep and wide version is the largest of all turn-key lumber kilns made for slower drying hardwoods.
Modular standard
The smallest version of the modular delivered lumber kilns is placed on a 6ft high concrete wall. The kiln is 27ft wide inside allowing 4 rows of 4ft lumber bundles and 14ft high clearance. The reversible fan, heat, and venting system are customized for your specific needs.
Modular deep
The deeper version of the modular delivered lumber kiln is placed on a 6ft high concrete wall. The kiln is 27ft wide inside allowing 5 rows of 4ft lumber bundles and 14ft high clearance. The reversible fan, heat, and venting system are customized for your specific needs.
Modular high
The taller version of the modular delivered lumber kiln is placed on a 10ft high concrete wall. The kiln is 27ft wide inside allowing 4 rows of 4ft lumber bundles and 18ft high clearance. The reversible fan, heat, and venting system are customized for your specific needs.
Modular deep-high
The taller and deeper version of the modular delivered lumber kiln is placed on a 10ft high concrete wall. The kiln is 27ft wide inside allowing 5 rows of 4ft lumber bundles and 18ft high clearance. The reversible fan, heat, and venting system are customized for your specific needs.
Standard end load
End loaded lumber kiln that is specifically design to be installed to be used as a track kiln. It is designed with very large heating system, extra air flow, and heat recovery is standard.
Raised end load
End loaded lumber kiln that is specifically design to be installed to be used as a track kiln. It is designed with very large heating system, extra air flow, and heat recovery is standard. This raised model is placed on a 8ft concrete wall.
Wooddryer System Kiln Controls
New and better software is available for operating you kilns.
Click to start live chat