Standard end load

All kilns

End loaded lumber kiln that is specifically design to be installed to be used as a track kiln. It is designed with very large heating system, extra air flow, and heat recovery is standard.

Standard components

› fourteen main fans (20in/2HP each)
› direct gas heating (two 850000 btu/hr)
› three power exhaust venting (2HP)
› heat recovery on venting
› full featured computerized controls
› wireless communications
› steel construction and outside sheeting
› inside aluminum sheeting

Available upgrades

› stainless steel sheeting inside
› main doors in both ends
› 1450000 btu/hr total output
› integrated wood moisture meter
› dual controller system for both drying and heat treating lumber
› high pressure misting system
› hot water heating coils
› steam heating coils


› outside length: 56ft
› outside width: 14ft
› outside height: 12ft 6in

› loading width: 55ft
› loading depth: 8ft
› loading height: 9ft 2in

› loading capacity: 16000 bf of 4/4 lumber

Click to start live chat