A modified lumber/pallet kiln End Loaded design and can be heated with gas or wood waste (through hot water or steam) at temperatures up to 200F / 95C. N.B. exclusively hot water heating rarely gets above 160F / 70C chamber temperatures.
› fourteen main fans (2HP each)
› direct gas heating (1850000 btu/hr)
› inside aluminum sheeting
› four power exhaust venting (2HP)
› heat recovery on venting (save gas when drying)
› full featured computerized controls
› wireless communication of office for record keeping
› stainless steel sheeting inside
› hot water heating coils
› steam heating coils
› outside length: 54ft
› outside width: 14ft
› outside height: 12ft 6in
› loading length: 49ft
› loading width: 10ft
› loading height: 9ft
