SmallQuick Firewood Kiln Home Products Firewood kilns Quick Firewood Kiln

The SmalliQuick Firewood Kiln was our second model in our new series of Firewood kilns, which we designed from the beginning for the specific purpose of drying and heat treating firewood.

After we launched the 6 cord MiniQuick several potential customers requested a larger unit. This new larger unit is basically a kiln that is twice as large with the same performance specifications.

**General specifications for SmallQuick Firewood Kiln**
Loading capacity	12 cord	Normally using twentyfour 1/2 cord baskets. Example
Outside dimensions (LxWxH)	29'x15'11"x11'6"	The wood waste with 34-bin conveyor loading system makes it 24 feet long.
Inside loading dimensions (LxWxH)	22'x14'6"x9'	The baskets must be elevated 8in over the floor.
Turn-key delivery.	YES	Kiln comes completely assembled and only needs to be placed on a solid flat surface (concrete normally) and connected to power (and possibly gas)
On-site installation assistance	YES	We will come for one day to finalize installation and educate you on how to run and maintain your kiln.
Fully automatic control system	YES	The process is fully automatic and the USDA upgrade adds more internal wood temp sensors to meet USDA requirements.
Time to meet USDA 160F/75min rules	7-12 hours	This is about the same time for both the gas and wood waste system.
Drying time (including meeting USDA)	24-48 hours	This will depend on specie, starting moisture content, final target moisture content.
Insulation of chamber	R24+	Foam insulation, class 1 fire rated, close cell and non-moisture absorbing
Inside sheeting	Optional	Standard unit has exposed foam, but the kiln can be upgraded with either Aluminum or Stainless steel inside.
Air circulation	9HP	Gas unit: 3 x 3HP main fan. Wood waste unit: 8 x 1.5HP.
Heating system	1000000 btu/hr	The wood waste heating is 800000-1200000 btu/hr depending on the wood waste and moisture content
Power exhaust venting	Two 1.5HP fan	This is to extract the moisture from the chamber during the drying process.
Heat recovery to save energy	YES (only gas model)	This insures that the incoming air is pre-heated using the hot/humid air we are exhausting, thereby reducing energy consumption. THIS IS NOT NEEDED ON WOOD WASTE MODEL AS THE INCOMING AIR ENTERS NEXT TO THE WOOD WASTE HEATING SYSTEM

SmallQuick Firewood Kiln Home Products Firewood kilns Quick Firewood Kiln

Upcoming events