Quick Firewood Kiln Home Products Firewood kilns

Kiln-direct has recently introduced our latest Firewood kiln, the model Quick Firewood Kiln, which is the first one to be designed specifically for drying and heat treating firewood. First we launched the MiniQuick with 5 cord capacity and later the larger SmallQuick for 10 cord capacity.

We were also fortunate to be able to showcase this kiln at the Sawlex 2009 Expo in Morgantown WV with an actual firewood drying process. (Detail of the actual demo run here).

PICTURE GALLERY FOR QUICK FIREWOOD KILN.
MiniQuick kiln with door closed. Power exhaust venting louver is the front.		Loading MiniQuick kiln with half cord metal baskets (from Kiln-direct) The kiln loads 10 baskets
Wood waste carriage for automatic loading of the firebox.		Top of back side of wood waste heating MiniQuick kiln with both chimneys sticking up.
Firebox drawing and grate with two fans for primary air on bottom and also showing Manual loading door with one fan for secondary air supply.		Loading system fully automated with pneumatic controls. Separate loading compartment with dual doors insure maximum safety.
Backside of Gas heated MiniQuick firewood kiln.		Miniquick firewood kiln with wood waste heating system on the way to a demo run at the Sawlex expo. Then going to customer afterwards.

General overview of equipment and function of the Quick Firewood kiln with Direct gas heating.

General overview of equipment and function of the Quick Firewood kiln with automated wood waste heating.