Chat
 

Login to account Create account Search our site:

Shopping cart

Company Kiln theory Products Tech support Online store Parts finder News Chat
 
Cost and Profit potential? What happen to the pallet in HT? Can we dry pallets? Cost of energy for heat treating? Can HT pallets mold? How do we get certified? Difference: direct/indirect heat? Difference: steam and dry heat? How long to Heat treat? Can we lease a kiln? Which parts on hand?
 

Which parts on hand? Home Kiln theory Heat treating (pallets) FAQ - pallet HT

Question: Which spare parts should I have for a pallet kiln?


Short answer:

There are very few consumable on a pallet kiln and most problems we have seen has been with the temperature sensors. This is normally not due to wear and tear, but rather mishandling. There are a few other burner components we believe it is a good idea to keep in stock. Also, remember that we can generally get you part by next day air, if you should need this.


Detailed answer:

We will provide you with a short and extended list. The extended list will generally apply to older units locatedn is in a remote area without easy access to maintenance parts. These lists are based on our standard design with direct gas heat system, such as the turn-key pallet kiln.

Short list:
2-4 pcs. Temperature sensor, type WSUS-SENSOR-PT100
1 pc. Print circuit for four channel RTD/PT100 to 4-20mA converter
type WSUS-SENSOR-4mA/PT100.
1 pc. Communication board, type F2-UNICON (not needed on wireless setups)
1 set. Various fuses: All have the dimensions 5x20mm and are slow-blow:
2-4 pcs. 500mA
5-10 pcs. 5A


Extended list:
2-4 pcs. Temperature sensor, type WSUS-SENSOR-PT100
1 pc. Print circuit for four channel RTD/PT100 to 4-20mA converter
type WSUS-SENSOR-4mA/PT100.
1 pc. Analog input module (F0-04AD-2) and maybe a input/output module (F004AD2DA-2).
1 pc. Pilot assembly cartridge for burner.
1 pc. Honeywell controller for burner.
1 pc. Control transformer for burner.
1 pc. High temperature safety switch.
1 pc. 3PDT relay with round 11-pins normally with a 24VAC coil.
1 pc. Three phase contactor normally with a 24VAC coil.
Get the largest version found in your cabinet
2-3 pcs. Manual motor overload protection, get one of each type in your cabinet.
2 pcs. Communication board, type F2-UNICON (not needed on wireless setups)
1 set. Various fuses: All have the dimensions 5x20mm and are slow-blow:
2-4 pcs. 500mA
5-10 pcs. 5A


 
 

Upcoming events

September 8th-10th: Lake State Logging Congress and Equipment Expo - Escanaba, MI - come visit us at our booth.
September 16th-17th: Kentucky Wood Expo 2011 - London, KY - come visit us at our booth.
September 30th - Oct 1st: Midwest Forest Industry Show - Cape Girardeau, MO - come visit us at our booth.
October 7th-9th: Paul Bunyan Show - Cambridge, OH - come visit us at our booth.

  

Copyright 2002-2012 Kiln-direct.com
All rights reserved
Powered by SalesKite

Company Kiln theory Products Tech support Online store Parts finder News